Video technical support, Free spare parts, Field installation, commissioning and training, Field maintenance and repair service, Engineers available to service machinery overseas
50 Set/Sets per Month
Packaging & Delivery
Any port in China
1 - 1
To be negotiated
BZC600 water well drilling rig Product parameters:
Main hook lifting capacity (kN)
Tool winch lifting capacity(kN)
Max- rope speed of main winch(m/min)
Max- rope speed of tool winch(m/min)
Inner diameter (mm)
Rotate speed (rpm)
Pressure 5 Mpa
The transmission box, main drive system, transmission box, double hydraulic winches, mud pump, rotary table, drilling tower and cylinder feeding mechanism are all installed on the chassis. It equipped with independent 132KW/2200rpm diesel engine, generator set (MF). According to the local geological conditions, the BZCY00 drilling rig can drill with mud pump and air compressor. It is highly adaptable to the stratum structure and can be used for drilling in clay, sand, highly weathered rock, bedrock, basalt and other strata.
Preparation and installation of drilling rig
1),The operators must be professionally trained, and should be familiar with the principles and operation of drilling rigs.
2),Before drilling, the workers should know the regional stratum. The operator should have the experience of drilling wells. According to the specific circumstances of the construction, develop preventive measures
3),Prepare well the equipment, tools and materials for drilling.
4),At the target hole, please make everything very well to facilitate entry for drilling rig.
5),Dig mud pool and sedimentation tank, the size and location can be determined in accordance with construction requirement.
6),Accordance with the drilling requirements, excavate hole size. The mud circulation groove 300 width * 400 mm depth is appropriate, and the length can confirm at the site. Dig several small sedimentation tanks in the mud circulation groove , adequate precipitation the fine sand in the mud to reduce the abrasion of mud and swivel. And put the protecting casing at the opening of the hole. (hole depth should contain the bit)
7),Check all parts if they are well or not, the parts fasten or loosen, inject the lubricants. To ensure that the drilling mud, the Dongfeng transmission, transfer case and other components are in the neutral position.
The swivel is the equipment of rotary system, and it is also a component of the water cycle system. It is under the swimming pulley, and it is connected with the high-pressure hose and main drill pipe/kelly. The V-shape seal ring and the core tube are the wearing parts. When the rig is working, it is usually to check the swivel, see if it works well. If it leaks mud, adjust the locking nut on the tap. If it can not be resolved, The V-shape seal ring and core pipe should be replaced.